How to Build a Storage Cart for Yard Tools?

Are you wondering how to build tool storage? Is that you are wondering, how to build a garden cart? If so, you will definitely feel delighted to know that if you are having the necessary resources and tools and you are willing to invest a fair extent of time and effort, you can opt for the DIY outdoor tool storage that will enable you to get a customized storage for yard tools that will not only serve the purpose, but, will serve as effective decorating item as well. Here is your guide that will enable you to execute the process, without having to face any troubles and hassles.

Getting ready – the tools and materials that you will need

You will require having the following tools and materials for executing the process:

Tools and Materials
  • Circular or Table Saw
  • Drill Press and/or Drill
  • Hole-saw bit
  • Nail Gun
  • Sander
  • Jigsaw
  • Routers coming with rounded-over bit
  • Plywood (thickness 3 to 4 inches)
  • Small Caster (medium duty)
  • Wood Glue and Hooks
  • Screws and nails

Once you have gathered all the tools and materials stated above, you can start the process and it will take the minimum time to complete the process.

Your guide for constructing the DIY outdoor tool storage

  • Start by cutting the 3 pieces of the platform in the dimensions of 18 x 24 inches.
  • Using the straight edge and Square for marking the centerline, you will have to lay out the holes and you should mark spacing of 4 inches on one of the platforms.
  • You will have to stack 2 pieces of the plywood platforms on each other, and the piece with marked centerline should come to the top. It will be wise to insert a piece so scrap under these panels during the drilling to avoid the chances for blowouts.
  • For accommodating tools like the post-hole digger, you should ideally connect the holes for creating the slots. Afterward, a reference line should be marked from the edges of any of the holes and cut it out, using the jigsaw.
  • Once done, separate the platforms and using a router you need to smooth the sharp hole and slot edges.
  • Complete the cutting works of the plywoods as necessary.
  • You will have to assemble the legs, using the wood glue, ensuring that the corner legs feature side dimensions of 4 inches.
  • Now it is the time to build the Bottom frame and you need to assemble the frame and nail the pieces, ensuring that the right pieces are nailed at the right slot.

How To Install Your Reverse Osmosis System

Standard filtration of water transformation into something better is time-consuming. Thus considering reverse osmosis system and addressing specific water problems is useful. Reverse osmosis helps in removing contaminants in the large majority from the water. This is a technology that pushes water through a semi-permeable membrane under pressure. There are few steps involved before you consider installing reverse osmosis system.


The storage tank and the assembly of reverse osmosis should be unboxed, checked for their good fit in the desired location. Check the adjustment required with pipes, drains or anything else prior to installing the RO system. The best reverse osmosis systems can be installed even in a garage. Actually, proper planning is required before installing as not much room is required even to fit under the sink, but it involves more installing work.

Install The Faucet

There is a need to install the faucet and this should be done first so that the lines are available under the sink. Now, mount the RO faucet housing on the kitchen sink with the provided hardware. Feed down the water line and connect the red tube (air gap) into the faucet. Do this before locking down the faucet onto the housing.


Installing the tank connector is essential before positioning the tank. Screw to the tank the connector to avoid cross threading and apply plumbers tape to the nipple of the tank thread so that it threads easily and hand tight the connector.

Filter Assembly

Remove the assembly cover filter; mark the locations on the wall to hang such that the RO unit is positioned straight. Ensure to keep at least 15 and ½ “distance from the floor so that there is enough room to clean filters and for filter assembly.

Water Line

The 2/4” green water line is hooked to the water line supply.  If the adapter is not used as there is built-in faucet of 3/8 “, you may shut the water and install a 3/8 x 3/8x ¼ adapter tree so that the faucet is hooked back and there is a green feed tube in ¼ “ line. The green line may be hooked using ferrule, nut and insert.

Connect Tubing

Maintain extra length of tubing and keep it in the cabinets back. Leaving extra tubing is helpful when the reverse osmosis system requires being moved anytime later. The connecting tubing may be trimmed to give a cleaner look.…

The Best Tools for Home Remodelling

Home remodeling is the process of renovating or making any kind of the addition of adding in one home. It can be termed as a project that helps in the upgradation of the existing home interior. That may include electrical, plumbing or exterior remodeling such as masonry, concrete etc.

Given are some of the well-known tools that are required for home remodeling.


Top rated cordless drills or drivers are categorized under power tool.

The machine enables you to cut a hole into wall, metal wood or any other material very easily.

The tool can also perform an operation other than drilling like countersinking and tapping larger and smaller holes.


Cordless Screwdriver

This is one of the basic tools that are often required for home remodeling purposes. The instrument is also referred as power screwdriver and its function is to drive the screws. You do not require drilling for driving the screws. However in most of the cordless screwdriver led light is given so that there is no option for shadows, you may use the led as a flashlight when needed. The one-handed instrument is very handy and easy to use for quick bit swaps.

Oscillation Tool

They are considered to be one of the fast-growing power tools and that is also for good reason. There is no matching of this versatility and it is worth owning this item. Having the tool in your home enables you to cut and grind easily. Other than this the tools also allow you to scrape very effectively. The cordless oscillating tool is provided with a battery so this enables you to carry the item anywhere you want.

Cordless Jigsaw

This is considered to be a must-have item and will help you to get rid of manual labor like working with saw and hand saw. They are compatible for working on plywood and boards of pine. These days cordless jigsaw has earned a massive popularity to the users as it enables them to do the work more fast and convenient way.

Reciprocating Saw

Like the above-mentioned item, this tool also possesses great importance to the users. However, in case of most homeowner consider it to be a luxurious item but if you consider the case of contractors the item is an indispensable one. The saw can be used for any sort of demo job and apart from this, it can also be used to cut the branches of the tree.

How to Repair and Repaint an Old Window

Wooden windows are great additions to the interior of your home and they give it that warm and glowing interior look that feels satisfying and looks great. Wooden windows are also great against the weather because as every person knows, wood is a great material for insulation, so wooden windows are perfect for keeping in those stray remnants of heat and cold outside of the house and away from slipping in through those small crevices in the window frame like other window types. Having said this, wooden windows have a short life and can get damaged very fast and easily. What you can we say, wood is a great but very fragile and susceptible material and after having been installed for some time, an old wooden window can start looking damaged and weathered, at which point you need to learn how to repair old windows.

Tools and Equipment Needed for Repairing Old Wood Windows
  • A putty knife
  • Some wood clamps
  • An extension cord
  • Sand paper (various grits ranging from 80-220 grit)
  • A saw table
  • A knife for glazing
  • Sander
  • Nailers (finishing and brading)
  • A chisel
  • A Wood Scraper
  • A gallon of glazing compound
  • Window compound

Method and Guide for Repairing Old Windows

Thinking of repairing old wood windows can be a very daunting and scary notion because wood can be so fragile and you have to take many precautions in repairing it properly, which is why these steps and method guide are perfect for anyone who wished to learn how to repair old wood windows. It is important to keep in mind that there are two types of repairing techniques usually utilized when it comes to old window repair.

The first technique deals with the repairs involving glass in an old window, usually, this method entails the replacement of old window glass and the installation of new glass into the window frame. The second technique and the more complex one in repairing old wood windows involves making repairs to the old wooden window frame and the sash of the wooden window.

The new wooden window frames should be approached with special care. The window frames must be clean and free of debris. Many use hand tools, but more advanced use wood routers. To choose a good wood tool, it’s worth only looking wood router reviews.

Window Sash is the component of a wooden window that basically consists of the frame and is the part of the window responsible for holding the window glass together.…

How to Hang Drywall

Materials for Drywall Installation DIY
  • Drywall panels
  • Screws
  • Drywall mesh tape
  • Primer
  • Drywall joint compound
  • Screw driver
  • Sand paper

Guide on How to Hang Dry Wall

Use the following steps closely to learn how to do drywall yourself successfully:

Step 1 The very first and foremost crucial step you need to keep in mind when you want to your own DIY drywall installation, is to make sure that your room is ready for the installation process. To do this you have to make a safety check around the room to see if everything is in order.

Before beginning to install drywall yourself, you have to prepare the room. What does preparing the room mean? It means to cover up all kinds of electrical wires and plumbing lines that may be in a room and keep them out of the way to prevent any accidental damage that might come to them.

Step 2 The second step in installing a drywall in the room yourself is to determine where you want to hang it. Mark that area with a pencil, properly measuring it as you go along, and outline the entire area that the drywall will be covering to prevent any improper or out of bounds installation of the drywall.
Step 3 The third step in your drywall Installation DIY is to use glue to stick your drywall panel to the area you have marked out with your pencil in the above earlier step and hold it in place. Take a step back and view the alignment to make sure it is correct, if not then make adjustments to the alignment quickly before the glue dries out. This gluing step is there to ensure a proper installation of screws into the drywall so there are no protruding screws.
Step 4 Now secure this piece of drywall in with nails by making sure not to tighten the screws too much, otherwise you’ll end up breaking through the panel to the other side. Use an extra safety screw if this ends up happening.
Step 5 After you’re done installing all the drywall panels to the wall by using the above methods, apply a mesh drywall tape to the surface of them.
Step 6 After applying the mesh drywall tape, put on a layer of joint compound on top of it and spread it out evenly. Wait for one layer to dry before applying a new one on top, making sure to cover all the visible screw heads, holes and gaps for a smooth and even look.

How to Install a Medicine Cabinet

Installing a medicine cabinet can seem like a big hassle if you’re not prepared. Use the guide below to learn exactly what you need, and which steps to follow to install a medicine cabinet on your own.

Tools and Materials Needed for Installing a Medicine Cabinet
  • A sturdy wooden medicine cabinet
  • A stud locator
  • Pencil
  • Measuring tape
  • Screwdriver
  • Screws

Step by Step Guide on How to Hang Medicine Cabinet

Using the steps outlined below you easily learn how to install a medicine cabinet on your own.

Figure out where the nailing strip and nail holes are located

Step 1 The very first step in installing a medicine cabinet on your own is to look for where the built in nail support strip and nail holes are located on the inside of the medicine cabinet which you wish to hang. Learning how to hang cabinets on drywall can be tricky which is why you need to know exactly how much spacing there will be between nail holes and how much support it will be getting.

Usually, the medicine cabinets purchased from stores come with a premade nailing strip and nail holes already drilled in so you don’t have to do much work. Simply located these nail holes and the nail support strip and measure the distance between the two holes and the size of the holes themselves so you know which type of nails or screws you will be using, and how much wall space you need to support the medicine cabinet.

Locate the studs in your drywall

Step 2 When learning how to hang cabinets on drywall, it is most important to remember that cabinets can be heavy and drywall is very fragile and fickle for objects that are too heavy for it to support solely with its own density. Find the studs that are already located in your drywall by using a stud locator. After locating the studs, mark that area in the wall by using a pen or pencil for reference so you can come back and reinforce the cabinet to that study area with screws.

Measuring and marking the area of the cabinet on the wall

Step 3 The third step in learning how to install a medicine cabinet is to measure the entirety of all the dimensions of the cabinet you will be installing and then figure out where you want it on the wall. Once you figure out how high you want the cabinet in your room, use the measuring tape to mark out the entire area where you wish for your medicine cabinet to go, taking special care to mark out the top of the cabinet.

How to Build an Outdoor Grill

Tools Materials
  • Cement
  • Mortar
  • Sand
  • Shovel
  • Bluestone
  • Measuring tape
  • Stone inlays

Build Outdoor Grill with These Easy Steps

Mark the foot area and drill into the ground

Step 1 When you’re looking for how to build an outdoor grill, the very first step you need to begin with is to mark out the area that will make up the footing on the grill outside in your yard on the stone or brick pavement. Use a measuring tape to make a template of the area of the footing by marking it out on the ground and demarking it with chalk. Once you’ve marked out the area you need to start preparing to drill into the ground with your drill because you need to remove the pavement stones to make room for digging into the ground for the foundation of the outdoor grill.

To cut into the stone pavement use a diamond blade grinder for making precision cuts and neat outlines into the pavement. Once you’ve cut and removed all the pavement stones it’s time to start digging out the ground beneath it. You have to dig the ground 6 inches in depth, but also have to be very careful when digging to make sure you do not accidentally dig into and rupture any utility wires or lines that laid out beneath the ground. Always make sure before starting the digging.

Prepare and lay in the cement

Step 2 Now that you’ve finished digging out the hole, the second step in learning how to build outdoor grill is to prepare a mixture or concrete or cement by taking it and mixing it thoroughly with some sand, lime, and mortar to create a nice and strong reinforcing mixture. Once you’re done mixing the cement, you’re ready to pour it into the freshly dug hole. But before doing so, it is best to cover up any visible utility lines or wires with some plastic wrap or a silicone sheet to protect it from cement damage and keep it safely away from the layer of cement once poured in.

Start pouring in the cement very evenly and very carefully so that no unwanted bubbles form and the foundation dries out to become very strong and uniform. Give this cement mixture footing a night to completely dry out before continuing to the next step.

Setting the stones for building a outdoor grill

Step 3 Now that you have prepared the footing area of your outdoor grill, here comes the next, very exciting, step in learning how to build an outdoor grill, which is setting the stones that will make up the majority of the body of your grill.

How to Install a New Door Jamb

A door jamb is an underrated and overlooked part of building any room. It may look unnecessary and undeserving of much attention during building but it is one of the most important components of the interior structure and building. Installing door jambs can mean a lot of things if done properly.

Properly installing door jamb can mean a door that closes all the way properly, and a door that stays in alignment with the jamb and the wall instead of tilting or protruding one way or the other. Not only is a door jamb important for construction, it is important for the functionality of the door and also serves a very important decorative function to match up with the rest of your interior.

If you install a door jamb that matches your interior and the style and color of your molding, it can add to the overall look of the whole room and the overall house interior by tying it all in together. This is why learning how to install door jambs is a very handy and necessary skill for those who enjoy personal building and interior projects in their home.

Things You Will Need to Install Door Jamb
  • Pen or pencil for markings
  • An electric drill machine
  • A saw table
  • A hand held saw
  • A nail gun
  • A hammer
  • Some paint and a paint brush
  • A measuring tape
  • Some wood boards
  • Molding for decoration
  • Nails
  • Putty
  • Filler for the wood
  • Safety gear

Steps on How to Install Door Jamb

Going through the steps given below you can learn how to install a door jamb on your own:

Wood Cutting for Jamb

Step 1 The first step in making your own door jamb is to start by measuring the dimensions of your door frame. For measuring, it’s important to keep in mind to not just measure the length of the door jambs, but also measure the width along the side of the walls for the door jamb. Once you’ve measured the door frame, it’s time to cut the wood for the jambs. Cut your door jamb by preparing with safety goggles and using a saw.

Putting Together the Jamb and Installing it

Step 2 After you’ve cut the wood pieces according to the measurements of the door frame, it’s time to put them together and create a frame that you’ll be installing into the door frame finally. First, use some glue to hold the pieces together as a frame and then use the nails to reinforce them together.